Premium 16-Way CATV RF Active Splitter Combiner With Amplifier

Description

Premium 16-Way CATV RF Active Splitter Combiner With Amplifier
Premium 16-Way CATV RF Active Splitter Combiner With Amplifier
This CATV RF splitter is a premium active type 1Ghz RF signal splitter for private cable  TV, antenna, analog/digital broadcast TV or MATV employing multiple modulators and other RF coax equipment.
It can split a RF or TV source signal for 16 TVs  or cable boxes and retain the same signal level with high isolation.
A powered 20-dB amplifier bundled in the package  for splitter mode use, Ideal for CATV, surveillance CCTV, antenna TV  operations.
This splitter can also be used in a reverse way  as a 16 in 1 out RF CATV combiner with no external power supply needed for the  operation.
True Lossless Active Type 16-Way RF CATV Splitter
This RF coax TV video splitter can provide 16  simultaneous amplified outputs with minimum loss through the bundled external  amplifier.
This active type splitter includes a 20-dB  amplifier so every one of the 16 RF outputs can carry and  retain the same signal level as  the original RF input.
Long Range Extension With 20dB Boost
This 16-way RF splitter is bundled with a powered RF amplifier with 20 dB boost for RF  input signals to be distributed over the long cable run.
Users can easily extend the cable TV or UHF/VHF  RF TV signal for another
1000FT or 300m
if the RF source signals have fair 70 to 75dB strength to start with.
So more TVs, TV tuners or set top boxes can be added in office  building or residence through this splitter combined with amplifier.
Wide Frequency Range Support
This unit supports a broad frequency range from 5 to 1000MHz. Most of the RF TV signals such as cable TV or antenna TV signals can be handled by this  unit.
16 In 1 Out RF CATV Combiner
This splitter can also be used in a reverse way as a 16 in 1 out RF CATV  combiner with no power supply needed.
It can combine RF coax signals from multiple and  up to 16 sources into one coax cable run.
High Isolation
This CATV combiner splitter provides high Port-To-Port isolation so each output can be transmitted in  stable quality with no noise or interference incurred.
1U Rack Mountable
This unit is built in 19" 1U size and rack mount ready for setup with other headend rack systems.
-20 dB Test Port
A front-panel -20 dB test port (75-ohm "F" type connector) allows testing of the unit's output without interrupting the service and easy for troubleshooting.
Professional high-end 1 in 16 out digital/analog RF  cable TV signal splitter.
Top-grade 16 in 1 out RF coax TV signal  combiner.
Designed to
divide/duplicate single RF input into     16 identical RF outputs with zero loss.
Distribute TV signal to up to 16 locations or  for 16 TVs  and each RF splitted  output will retain the same level.
Ideal for CATV, surveillance CCTV, aerial  TV and MATV coaxial operations.
An external 20-dB amplifier included.
Built with
high Port-To-Port isolation  between RF TV signals so each output can be transmitted in stable quality  with no noise or interference incurred
.
Supports broadband frequency range of
5 to     1000MHz
.
75-ohm impedance for all outputs provides the best possible signal.
Die cast housing for absolute minimal     losses
.
Standard 19" 1U size rack mountable
.
RF Input:
75 ohm, Coax F-Type Female x 1
RF Outputs:
75 ohm, Coax F-Type Female x 16
Frequency Range:
5~1000MHz
Input Power:
75 dBuV
Insertion Loss:
typical 1dB
Frequency Response:
typical 2 dB
Isolation out-to-out:
typical 20 dB
Return Loss-Input:
12~14dB, typical  13 dB
Return Loss-Output:
10~12dB, typical  11 dB
Noise Figure:
typical 5 dB
AC Power:
110V(60Hz) with US 2-Prong  plug
16-way RF CATV splitter/combiner
RF amplifier with 20dB gain for 110V AC  power use
User manual