-40%

High-Isolation 16-Channel CATV RF Combiner With -20dB Testing Port

$ 38.01

Availability: 31 in stock
  • Type: RF combiner
  • Condition: New
  • Brand: Unbranded
  • MPN: RF-CS16ws

    Description

    Professional 16-Channel CATV RF Combiner 1U Rack-Mountable
    Professional 16-Way CATV RF Combiner 1U Rack-Mountable
    This CATV combiner is a top-grade RF CATV signal combiner designed fro private cable networks employing multiple modulators and processing equipment.
    It can combine 16 RF TV source signals into one  coax cable run with no external power supply needed for the  operation.
    This RF CATV combiner could also be used in a  reverse way as RF TV splitter when combined with use of a RF amplifier.
    Built with high isolation so its output can be  transmitted in stable quality with no noise or interference incurred.
    Ideal for all CATV, MATV, surveillance CCTV and antenna TV coaxial operations.
    16 In 1 Out RF CATV Combiner
    This unit is a top-grade RF CATV  combiner with no power supply needed. It can combine up to 16 RF TV source signals into one coax cable run.
    Wide Frequency Range Support
    This unit supports a broad frequency range from 5 to 1000MHz. Most of the RF TV signals such as cable TV or antenna TV signals can be handled by this unit.
    High Isolation
    This CATV combiner provides high Port-To-Port isolation between RF TV signals so the combining will have no potential of channel interaction
    Each adjacent TV channel can be transmitted in stable quality with no noise or interference incurred.
    1U Rack Mountable
    This CATV combiner is built in 19" 1U size and  rack mount ready for setup with other headend rack systems.
    -20 dB Test Port
    A front-panel -20 dB test port (75-ohm "F" type connector) allows testing of the unit's output without interrupting the service and easy for troubleshooting.
    Professional quality 16-way RF CATV combiner
    designed fro private cable TV networks     employing multiple RF modulators and processors.
    Combines up to 16 RF TV source signals  into one coax cable run
    with no external power supply needed for the  operation.
    Ideal for CATV, surveillance CCTV aerial TV     and antenna TV coaxial operations.
    This RF CATV combiner could also be used in  a reverse way as RF TV splitter when combined with use of a RF amplifier.
    Built with
    high isolation so its RF output can be  transmitted in stable quality with no noise or interference incurred
    .
    A
    -20 dB test port
    on the front panel allows testing of the unit's output without interrupting the service.
    Supports broad frequency range of
    5 to     1000MHz
    .
    Port-To-Port isolation
    ensures combining without the potential of channel     interaction.
    RFI shielding
    for minimized egress/ingress interference.
    Die cast housing for absolute minimal insertion     losses
    .
    19" 1U size and rack mount ready
    for setup with other head-end rack systems.
    RF Output: Coax F-Type Female x 1
    RF Inputs: Coax F-Type Female x 16
    RF Frequency Range: 5~1000MHz
    Insertion Loss: <= 21dB (Typical)
    Isolation: 30dB (Typical)
    Test Point: -20dB